International Journal

  • 2017
    1. Janghyeon Lee, Tak Gen Kim, Dongho Kim, Joohyun Kim, and Si-Hyung Lim, "Improvements in the Performance of a Microthermal Flow Sensor using Asymmetrically Located Temperature Sensors," International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 2, 2017 

  • 2016
    1. Sumit Barthwal, Yura Kim, Joon Ahn, and Si-Hyung Lim, “Fabrication of a Superamphiphilic SS-400 Oil Separator Surface using a Ag-doped ZnO Nanorod Coating,” Science of Advanced Materials, Vol. 8, 2016

  • 2015
    1. Bonsik Joo, Dong-Hyun Lim, Si-Hyung Lim*, Sungho Yoon*, "A Facile Method to Fabricate a 3-D Porous Structure with Ag Nanowires as a Sensor Platform," Science of Advanced Materials, Vol.7, No. 4, 2015 (*:Co-corresponding author)
    2. Seongil Jang , Joon Ahn*, Si Hyung Lim*, "Performance of Oil-Separator Adopting Nature Inspired Surface," International Journal of Precision Engineering and ManufacturingVolume 16, Issue 102015 (*:Co-corresponding author)
  • 2014
    1. Jeong Seok Oh, Hyo Jung Bng, Si-Hyung Lim, "The System of Stress Estimation for the Exposed Gas Pipeline Using the Wireless Tilt Sensor," Mobile, Ubiquitous, and Intelligent Computing, Lecture Notes in Electrical Engineering, Vol. 274, 2014
    2. Mi Jung, Dang Mo Yoon, Miyoung Kim, Chulki Kim, Taikjin Lee, Jae Hun Kim, Seok Lee, Si-Hyung Lim, and Deokha Woo, "Enhancement of hole injection and electroluminescence by ordered Ag nanodot array on indium tin oxide anode in organic light emitting diode," Applied Physics Letter, Vol. 105, 2014
    3. Sumit Barthwal, Si-Hyung Lim, "Fabrication of long-term stable superoleophobic surface based on copper oxide/cobalt oxide with micro-nanoscale hierarchical roughness," Applied Surface Science, 2014.
    4. Janghyun Lee, Mi Jung, Sumit Barthwal, Seok Lee, Si-Hyung Lim, "MEMS gas preconcentrator filled with CNT foam for  exhaled VOC gas detection," Bio Chip Journal, 2014.
  • 2013
    1. Jung-Hyun Na, Man-Seok Joo, Won-Kyu Lee, Hyunbo Shim, Si-Hyung Lim, Sang Taek Jung, and Yeon Gyu Yu, "Development of a Single Chain Antibody Using a Phage Display Cloning Method for the Detection of 2,4-Dinitrotoluene," Bulletin of the Korean Chemical Society, Vol. 34, No. 2, 2013
    2. Sumit Barthwal, Young Su Kim, Si-Hyung Lim, "Fabrication of Amphiphobic Surface by Using Titanium Anodization for Large-Area Three-Dimensional Substrates," Journal of Colloid and Interface Science, Vol. 400, 2013
    3. Sumit Barthwal, Young Su Kim, Si-Hyung Lim," Mechanically Robust Superamphiphobic Aluminum Surface with Nanopore-embedded Microtexture," Langmuir, Vol. 29, 2013.
  • 2012
    1. Sumit Barthwal, Young Su Kim, Si-Hyung Lim, "Superhydrophobic and superoleophobic copper plate fabrication using alkaline solution assisted surface oxidation methods," International Journal of Precision Engineering and Manufacturing, Vol. 13, 2012
  • 2011
    1. Wonho Choi, Inkoo Kang, Hong Jae Yim, Si-Hyung Lim, "Development of a large area plate-to-plate type UV imprinting tool," Microelectronic Engineering, 2011
    2. Jiyeon Kim, Si-Hyung Lim, Yeoil Yoon, T. Daniel Thangadurai, Sungho Yoon,“A fluorescent ammonia sensor based on a porphyrin cobalt(II)-dansyl complex,” Tetrahedron Letters, Vol. 52, 2011
  • 2010
    1. Hyeon-Jun Jang,  Jung-Hyun Na, Bong-Suk Jin, Won-Kyu Lee, Woong-Hee Lee, Hyun Jin Jung, Seok-Chan Kim, Si-Hyung Lim, and Yeon Gyu Yu“Identification of Dinitrotoluene Selective Peptides by Phage Display Cloning,” Bulletin of the Korean Chemical Society, Vol. 31, 2010
    2. Sung Pill Jang, Chan Young Cho, Jin Hyun Nam, Si-Hyung Lim, Donghoon Shin, and Tae-Yong Chung, "Numerical Study on Leakage Detection and Location in a Simple Gas Pipeline Branch using an Array of Pressure Sensors," Journal of Mechanical Science and Technology, 2010
  • 2009
    1. Insoo Park, Si-Hyung Lim, Donghoon Shin, Kee Sung Lee, Siyoul Jang, Hong Jae Yim, Chongjin Won and Jay I. Jeong, "Heat transfer analysis during a curing process  for UV nanoimprint lithography," Journal of Mechanical Science and Technology, 2009
    2. Rae-Hyeong Ryu, Si-Hyung Lim, Jay I. Jeong, Donghoon Shin, Siyoul Jang, Hong Jae Yim and Kee Sung Lee, "Indentation experiment and analysis on mold and resin material during the nanoimprint process," Journal of Mechanical Science and Technology, 2009
    3. Hong Jae Yim, Yong Hoon Lee, Sung Hoon Lee, Jay Il Jeong and Si-Hyung Lim, "Multi-layer alignment control of a large area nano-imprinting stage," Journal of Mechanical Science and Technology, 2009
    4. Rae-Hyeong Ryu, Si-Hyung Lim, Jay I. Jeong, Donghoon Shin, Siyoul Jang, Hong Jae Yim, Kee Sung Lee, "Theoretical and Experimental Analysis of Material Deformation by Microcontact," International Journal of Precision Engineering and Manufacturing, 2009
    5. I. Park1, H. Yim, S. Jang, D. Shin, S. Lim, and J. I. Jeong, "Deformation of a LCD Glass-Panel by Alignment Process in Nanoimprint Lithography, Journal of Nanoscience and Nanotechnology, 2009
  • 2008
    1. Si-Hyung Lim*, Digivijay Roarane*, Arun Majumdar, "Nanomechanical assay to investigate the selectivity of binding interactions between volatile benzene derivatives," Nano Letters, Vol.8, No. 8, 2008. (*: Equal contribution) 
    2. Si-Hyung Lim, Hong Jae Yim, "Interferometric measurement using bimorph actuated staggered mirror(BASM) microsensor," Journal of Mechanical Science and Technology, Vol. 22, 2008
    3. Jae-Hwan Lim, Hong Jae Yim, Si-Hyung Lim, Taewon Park, “Study on numerical solution method for efficient dynamic analysis of constrained multibody systems,” Journal of Mechanical Science and Technology, Vol. 22, 2008
  • 2007
    1. Si-Hyung Lim, “Chemical vapor detection using nanomechanical platform,” Journal of Mechanical Science and Technology, Vol. 21, 2007
  • 2006
    1. Si-Hyung Lim, Digvijay Raorane, Srinath Satyanarayana, Arunava Majumdar, “Nano-chemo-mechanical sensor array platform for high throughput chemical analysis,” Sensors and Actuators B Chemical, Vol. 119, 2006
    2. Si-Hyung Lim, Roberto Horowitz, Arunava Majumdar, “Modeling and performance of two types of piston-like out-of-plane motion micromechanical structures,” Journal of Micromechanics and Microengineering, Vol. 16, 2006
  • 2005
    1. Si-Hyung Lim, Jongeun Choi, Roberto Horowitz, Arunava Majumdar, “Design and fabrication of a novel bimorph micro-opto-mechanical sensor,” Journal of Microelectromechanical Systems, Vol. 14, No. 4, 2005
Comments